Cleaning

Clean TubusOne™- an easy 3 step guide

wash, graphic illustration
Disassembly Tubusone™ graphic illustration

1. Disassembly 

TubusOne™ is easy to disassemble.

Turn the aluminum tube (1) from the piston (2) counterclockwise. 


Remove the tip (3) and pull the thin black stick out of the piston (2). 


You now have three loose parts (1),(2),(3). 

wash, graphic illustration
wash, graphic illustration

2. Clean

Insert cleaning rod (4) into aluminum tube (1) and move back and forth. 


1. Wash aluminum tube (1) in water and soap. 

2. Wash the round part in water and soap.

3. Always rinse in clean water after washing, to make sure no soap rests are left in any of the components.

wash, graphic illustration
Assembly graphic illustration

3. Assembly

Be sure that all the components are dry before assembly. 

Insert the thin stick into the piston (2) from the end with the thread. The tip (3) should be attached to the thin stick. Push the tip (3) all the way down. Press to ensure it is mounted correctly. Turn the aluminium tube (1) onto the piston (2) and attach the mouthpiece (5) to the aluminium tube (1). Both holes must face down.

TubusOne parts, Aluminium tube, Piston, Tip, Cleaning rod, Mouthpiece

TubusOne™ mouthpiece Recommendations

We recommend replacing the mouthpiece every day or whenever one of the following things occur:


The mouthpiece is dropped on the floor

The mouthpiece is used by another person

The mouthpiece is in contact with animals

The mouthpiece is in contact with contaminated areas or areas at risk of being contaminated


Mouthpiece

General: 

Cleaning the tube regularly

Replace the tip when worn out for optimal use 

Handle TubusOne™ products with hygienic responsibility

Storage:

Store you're TubusOne™ in a dry place. 

Extra parts, including mouthpieces and tips, should be stored in the included sealed packaging.

Download cleaning guide

Regular cleaning of your TubusOne™ and its parts is important for optimal hygiene and the use of your device. With the exception of the tip, all components in the TubusOne™ can be washed in water and soap. Before cleaning it is necessary to disassemble the TubusOne. 

Download the cleaning guide in your preferred language:


And remember ...

✔️ Check that the round end doesn't exceed the hole in the mouthpiece when the tube is held vertically. If it's visible the tip has to be pressed down to the stick. 
✔️ Check that the mouthpiece is mounted correctly on the aluminium tube with both holes facing downwards 
✔️ Check that the top has been pressed correctly down on the thin stick
✔️ In case the TubusOne™ does not work, try to replace the tip of the mouthpiece or clean the product and try again.